RESUMO
Research on phase change material (PCM) for thermal energy storage is playing a significant role in energy management industry. However, some hurdles during the storage of energy have been perceived such as less thermal conductivity, leakage of PCM during phase transition, flammability, and insufficient mechanical properties. For overcoming such obstacle, researchers have been concentrating on composite PCM, where PCM is combined with metal or non-metal particles, fibrous materials, expanded or porous materials, and flame retardants. The main purpose of the current paper is to review the properties enhanced paraffin-based composite PCM. In the literature review, paraffin is selected as a thermal energy storage material, which is mixed with property-enhancing material to prepare composite. Structural and thermal properties of composite have been explored with the help of scanning electron microscope, X-ray diffractometer, transmission electron microscope, polarizing optical microscope, Fourier transform infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry. Mechanical properties of the material are also portrayed using different testing techniques. Nevertheless, numerical methods have also been adopted for characterization of composite. It is found from the literature review that with incorporation of property-enhancing material, thermal conductivity, phase transition rate, and shape stability of PCM increased at the same time flammability, heat storage capacity, and mechanical properties reduced.
RESUMO
A stability-indicating high-performance liquid chromatographic (HPLC) method was developed with short run time and validated for the assay of process related impurities of pantoprazole in bulk form. Resolution of drug, its potential impurities and degradation products were achieved on a Hypersil ODS column utilizing a gradient with 0.01 M phosphate buffer of pH 7 and acetonitrile as eluent, at the detection wavelength of 290 nm. Flow rate was set at 1 mL min-1. The procedure was found to be specific, linear (r=0.999), recovery (97.9-103%), LOD (0.043-0.047 µgmL-1), LOQ (0.13-0.14 µgmL-1) and robust. Acceptable robustness indicates that the assay method remains unaffected by small but deliberate variations. Pantoprazole was found to degrade in acidic, oxidative and under photolytic stress conditions. The drug was stable to alkaline and dry heat conditions. This method has been successively applied to pharmaceutical formulation and no interference from the excipients was found.
Desenvolveu-se método indicador de estabilidade por Cromatografia a Líquido de Alta Eficiência (CLAE) com pequeno tempo de corrida e validado para o ensaio de impurezas relacionadas ao processo de produção de pantoprazol em batelada. A determinação do fármaco, de suas impurezas potenciais e dos produtos de degradação foi realizada com coluna de ODS Hypersil, utilizando gradiente com tampão de fosfato 0,01 M pH 7 e acetonitrila como eluente, no comprimento de onda de detecção de 290 nm. A velocidade de fluxo foi fixada em 1 mLmin-1. O procedimento se mostrou específico, linear (r=0,999), com recuperação (97,9-103%), LOD (0,043-0,047 µgmL-1), LOQ (0,13-0,14 µg mL-1) e robusto. Robustez aceitável indica que o método de ensaio não é afetado por variações pequenas, exceto as planejadas. O pantoprazole degradou em condições ácidas, oxidativas e sob condições de estresse fotolítico. O fármaco foi estável em condições alcalinas e de calor seco. Este método tem sido sucessivamente aplicado à formulação farmacêutica e não se encontrou interferência de excipientes.
